|
Product Details:
|
| Performance: | Good Corrosion Resistance | Application Field: | Casting Parts For Pump 、pipe、 Valve |
|---|---|---|---|
| Cooperation Case: | DONGFENG | Main Ingredients: | Organic Acid |
| High Light: | electrophoretic coating,ced painting |
||
Color electrophoretic paint for casting pieces
|
The appearance of the coating is flat, delicate, smooth, uniform high gloss
|
|
Good stability of bath can adaptable for a longer updating cycle
|
|
The bath has strong anti-shrinkage and anti-pollution ability
|
|
Coating fullness of good, better substrate hiding
|
|
Pigment: Titanium pigment, Organic pigment, kaolin, antirust pigment
|
Additives: surface active agent, prevent shrinkage cavity agent |
|
Curing agent: totally enclosed multi-isocyanates
|
Matrix resin: acrylic modified epoxy resin |
Bath on site management project :
Good bath data and coating quality, from the strict parameters management and maintenance of equipment, production line according to its own reality time situation, can have different management project and specifications, recommend the construction parameters see the table below for reference:
| Classification | Project | Control Data | Testing frequency | |
| New bath | Anolyte | |||
| Electrophoresis tank | Ratio | 1:4 | -- | |
| Ripening time | 24-48 | -- | ||
| Solid ( 120 ℃ /1h ,% ) | 15±5 | -- | once a day | |
| PH | 5.4-6.0 | 2.0-3.5 | once a day | |
| Conductivity ( μs/cm ) | 1100±500 | 1400±900 | once a day | |
| P/B | Smooth horizontal plane and vertical plane without obvious differences |
once a week | ||
| Solvent content (%) | 0.8-1.5 | once a week | ||
| Liquid level Fall head (cm ) | 10-15 | once a day | ||
| ED voltage( V ) | 0-300 | once a day | ||
| Break voltage ( V ) | ≥350 | once a week | ||
| Bath temperature ( ℃ ) | 30±2 | once a day | ||
| ED time( S ) | 60~180 | once a day | ||
| UF － 1 Tank | Solid content (%) | ≤2.0 | once a day | |
| UF － 2 Tank | Solid content (%) | ≤0.8 | once a day | |
| Baking furnace | Provisions furnace temperature( ℃ ) | 170-190 | once a day | |
| Curing conditions | Drying temperature | (165-185) ℃ ×( 15-20)min (With content holding time) |
once a day | |
Storage, packaging and transportation :
This product is a water-borne industrial coatings, non-hazardous, non-inflammable and explosive products; transportation to prevent direct sunlight, avoid freezing (>5℃ ); Packaging for 50/60/200L Plastic barrel; in the transport and storage of drums should be maintained clean, avoid charging the dirt brought in on drums during filling tank, again checked and confirmed that the quality of products, including paste resin, emulsions and additives should be indoor storage, good ventilation, dry, protect against freezing and overheating, the storage temperature should be controlled at 5～35℃, products from the date of production, over shelf, experimentation is required to determine whether can continue to use.
If you want to learn more about HLS coating products, please contact Sales Department of Shanghai HLS now
Specification statement :
This manual contains information and recommendations are based on our current knowledge and experience, accurate to the date of publication so far. It cannot be used as a guarantee or commitment, in any case, responsibility for users to decide on the use of this product is intended availability. We remain in the process or new development within the scope of the right to change product specifications. Because we cannot control the construction conditions, hope through customers own experiments to determine satisfaction with the final results.
If you want to learn more about HLS coating products, please contact Sales Department of Shanghai HLS now
Customers in the colorful industry :
Fax: 86-021-69122952
