Product Details:
|
Application Field: | Car Skylight | Cooperation Case: | GREET WALL,BAIC MOTOR |
---|---|---|---|
Performance: | Better Anticorrosive | Main Ingredients: | Organic Acid |
High Light: | electrocoat paint,cataphoretic painting |
Electrophoretic coating for automobile skylight industry
Product Introduction
HLS-1701ELB/HLS-1701EG Black Cationic Epoxy Electrocoat for auto is a new generation electrophoretic coating researched and developed by HLS Paint (Shanghai) Co., Ltd.
|
It represents modern technology of cathodic electrophoretic coating that is environment-friendly with high property and low cost. Such coating does not contain heavy metal like lead, tin, cadmium and mercury etc. It is a two-component, water-dispersed resin,meanwhile, it took in features of previous products, and can adapt galvanized steel sheet perfectly, almost can be applied to foundation coating of all metal, such as: cold and hot rolled steel sheet, galvanized steel sheet, aluminum products, zinc-aluminum alloy sheet and stainless steel sheet etc.
|
This product features shown below:
Coating fullness of good, better substrate hiding .
Ideal for high demand for salt spray industry, such as pipe trench, auto chassis parts, castings etc.
Neutralizing agent: organic acid
The main component Matrix resin:
Additives:surface active agent, prevent shrinkage cavity agent | |
Pigment:Titanium pigment, carbon black, kaolin, antirust pigment | |
Matrix resin:polyurethane modified epoxy resin |
Bath on site management project:
Good bath data and coating quality, from the strict parameters management and maintenance of equipment, production line according to its own reality time situation, can have different management project and specifications, recommend the construction parameters see the table below for reference:
Classification | Project | Control Data | Testing frequency | |
New bath | Anolyte | |||
Electrophoresis tank | Ratio | 1:6 | -- | |
Ripening time | 24-48 | -- | ||
Solid ( 120 ℃ /1h ,% ) | 14±4 | -- | once a day | |
PH | 5.6-6.2 | 2.0-3.5 | once a day | |
Conductivity ( μs/cm ) | 1200±400 | 2000±1000 | once a day | |
P/B | 0.08-0.15 | once a week | ||
Solvent content (%) | 0.8-1.2 | once a week | ||
Liquid level Fall head (cm ) | 10-15 | once a day | ||
ED voltage( V ) | 0-300 | once a day | ||
Break voltage ( V ) | ≥320 | once a week | ||
Bath temperature ( ℃ ) | 30-36 | once a day | ||
ED time( S ) | 60~180 | once a day | ||
UF - 1 Tank | Solid content (%) | ≤2.0 | once a day | |
UF - 2 Tank | Solid content (%) | ≤0.8 | once a day | |
Baking furnace | Provisions furnace temperature( ℃ ) | 170-190 | once a day | |
Curing conditions | Drying temperature | (165-185) ℃ x(15-20)min (With content holding time) |
once a day |
Customers in the Automotive skylight industry:
Fax: 86-021-69122952