Payment & Shipping Terms:
|Application Field:||Automotive Wheel||Performance:||High Weatherability|
|Cooperation Case:||Dicastal，zxwheel||Main Ingredients:||Totally Enclosed Multi-isocyanates|
Automotive wheels hub and Steel rings electrophoretic paint
Product Introduction :
HR-4000LB/HR-6000 the bottom of one black cathode electrophoretic coating, is HLS Paint (Shanghai) Co., Ltd., the eighth generation of independent research and development of electrophoretic coating.
This coating by epoxy acrylate modified, the film also has excellent corrosion resistance and weatherability, smooth appearance and full, suitable as a base topcoat system. In addition, the lead, cadmium, chromium, mercury and other heavy metals, two-component, water dispersible resin, at the same time, previous generations of the product characteristics, have good adaptability to the galvanized steel, almost can be applied to all metal coating,
such as: cold hot rolled steel, galvanized steel, aluminum, zinc Aluminum Alloy plate, stainless steel plate.
This product features shown below:
Good stability of bath can adaptable for a longer updating cycle.
High penetration and good uniformity of internal and external.
Have excellent corrosion resistance and weathering resistance, especially suitable for the bottom surface of a painting
1,Neutralizing agent: organic acid
2,Additives: surface active agent, prevent shrinkage cavity agent
3,Pigment: carbon black, kaolin, antirust pigment
Bath on site management project:
Good bath data and coating quality, from the strict parameters management and maintenance of equipment, production line according to its own reality time situation, can have different management project and specifications, recommend the construction parameters see the table below for reference:
|Classification||Project||Control Data||Testing frequency|
|Solid ( 120 ℃ /1h ,% )||15±5||--||once a day|
|PH||5.4-6.0||2.0-3.5||once a day|
|Conductivity ( μs/cm )||1000±500||1400±900||once a day|
|P/B||0.08-0.15||once a week|
|Solvent content (%)||0.5-1.8||once a week|
|Liquid level Fall head (cm )||10-15||once a day|
|ED voltage( V )||0-300||once a day|
|Break voltage ( V )||≥320||once a week|
|Bath temperature ( ℃ )||28-35||once a day|
|ED time( S )||60~180||once a day|
|UF － 1 Tank||Solid content (%)||≤2.0||once a day|
|UF － 2 Tank||Solid content (%)||≤0.8||once a day|
|Baking furnace||Provisions furnace temperature( ℃ )||170-190||once a day|
|Curing conditions||Drying temperature||
(165-185) ℃ ×(15-20)min (With content holding time)
|once a day|
Storage, packaging and transportation
This product is a water-borne industrial coatings, non-hazardous, non-inflammable and explosive products; transportation to prevent direct sunlight, avoid freezing (>5℃ ); Packaging for 50/60/200L Plastic barrel; in the transport and storage of drums should be maintained clean, avoid charging the dirt brought in on drums during filling tank, again checked and confirmed that the quality of products, including paste resin, emulsions and additives should be indoor storage, good ventilation, dry, protect against freezing and overheating, the storage temperature should be controlled at 5～35℃, products from the date of production, over shelf, experimentation is required to determine whether can continue to use.
Contact Person: Penny