|
Product Details:
|
| Application Field: | Harvester | Cooperation Case: | WORLD GROUP |
|---|---|---|---|
| Performance: | Excellent Adhesion | Main Ingredients: | Antirust Pigment |
| High Light: | edp coating,electro coating |
||
Solution for the electrophoretic paint of the harvester
Product Introduction:
HS-6060LB/HS-2516G Gray Cationic Epoxy Electrocoat for auto is a new generation electrophoretic coating researched and developed by HLS Paint (Shanghai) Co., Ltd.
It represents modern technology of cathodic electrophoretic coating that is environment-friendly with high property and low cost. Such coating does not contain heavy metal like lead, tin, cadmium and mercury etc. It is a two-component, water-dispersed resin,meanwhile, it took in features of previous products, and can adapt galvanized steel sheet perfectly, almost can be applied to foundation coating of all metal
such as: cold and hot rolled steel sheet, galvanized steel sheet, aluminum products, zinc-aluminum alloy sheet and stainless steel sheet etc.
This product features shown below :
|
The bath has strong anti-shrinkage and anti-pollution ability.
|
Strong anti-corrosion properties, good salt spray resistance workpiece edge. |
|
Coating fullness of good, better substrate hiding .
|
Excellent leveling coating,good bonding force and compatibility with plastic powder. |
The main component Matrix resin :
1,Pigment: Titanium pigment, carbon black, kaolin, antirust pigment
2,Additives: surface active agent, prevent shrinkage cavity agent
3,Solvent: alcohol ether
4,Neutralizing agent: organic acid
Product quality data:
| Project | Technical data | Test standard | ||
| Resin (HS-6060LB) | Gray Paste(HS-2668G) | |||
| Appearance | —— | Milky white liquid | Gray viscous liquid,no agglomeration | Visual |
| pH | 25℃ | 6.0±1.0 | —— | GB/T 9724 |
| Conductivity | 25℃, μs/cm | 1400±400 | —— | HG/T 3334 |
| Storage stability | No stratified state, and there were no obvious difference compared to before storage |
In 5-35 ℃ temperature 1 year | ||
Note: pH, conductivity measurement in the resin/pure water = 1:1 dilution
Specification statement:
This manual contains information and recommendations are based on our current knowledge and experience, accurate to the date of publication so far. It cannot be used as a guarantee or commitment, in any case, responsibility for users to decide on the use of this product is intended availability. We remain in the process or new development within the scope of the right to change product specifications. Because we cannot control the construction conditions, hope through customers own experiments to determine satisfaction with the final results.
If you want to learn more about HLS coating products, please contact Sales Department of Shanghai HLS now
Fax: 86-021-69122952
