|
Product Details:
|
| Performance: | Color Uniformity | Main Ingredients: | Organic Acid |
|---|---|---|---|
| Cooperation Case: | MEIDE GROUP | Color: | Color |
| High Light: | edp painting,anti rust coating for cars |
||
Low temperature curing colorful electrophoresis paint
Product Introduction :
OHT-825 Ultra Low temperature color Cationic Epoxy Electrocoat, is HLS Paint (Shanghai) Co., Ltd. the ninth generation of independent research and development of electrophoretic coating. The lead, cadmium, chromium, mercury and other heavy metals, two-component aqueous dispersion resin. At the same time, inherited the characteristics of several generations of product quality, OHT-825 on galvanized steel sheet has good adaptability, almost at the bottom of all the metal material coating
This product features shown below :
|
Good stability of bath can adaptable for a longer updating cycle.
|
High penetration and good uniformity of internal and external |
|
Ultra low temperature curing completely green does not contain heavy metals, in conformity with the European ROHS, the instruction of PAHs, reach, fohs, can save about 60% of the energy consumption, is the national government absolute attention and support energy-saving emission reduction requirements of the project, the state and the enterprises and the people.
|
|
Main ingredients :
1, Additives: surface active agent, prevent shrinkage cavity agent
2, Matrix resin: Acrylic modified epoxy resin
3, Pigment: carbon black, kaolin, antirust pigment
4, Solvent: alcohol ether
Bath on site management project :
Good bath data and coating quality, from the strict parameters management and maintenance of equipment, production line according to its own reality time situation, can have different management project and specifications, recommend the construction parameters see the table below for reference:
| Classification | Project | Control Data | Testing frequency | |
| New bath | Anolyte | |||
| Electrophoresis tank | Ratio | 1:(4-5) | -- | |
| Ripening time | 24-48 | -- | ||
| Solid ( 120 ℃ /1h ,% ) | 10-20 | -- | once a day | |
| PH | 5.1-5.8 | 2.0-3.5 | once a day | |
| Conductivity ( μs/cm ) | 1200±400 | 1500±700 | once a day | |
| P/B | 0.1-0.2 | once a week | ||
| Solvent content (%) | 2.0-4.5 | once a week | ||
| Liquid level Fall head (cm ) | 10-15 | once a day | ||
| ED voltage( V ) | 0-280 | once a day | ||
| Break voltage ( V ) | 350 | once a week | ||
| Bath temperature ( ℃ ) | 30±2 | once a day | ||
| ED time( S ) | 60~180 | once a day | ||
| UF － 1 Tank | Solid content (%) | ≤2.0 | once a day | |
| UF － 2 Tank | Solid content (%) | ≤0.8 | once a day | |
| Baking furnace | Provisions furnace temperature( ℃ ) | 135-145 | once a day | |
| Curing conditions | Drying temperature | (130-140) ℃ ×(15-20)min (With content holding time) |
once a day | |
Construction equipment :
Cathodic electrophoretic coating construction in the electrophoresis tank, so need to have the following equipment:
Electrophoresis tank
Circulation devices (including filter, fill the paint device)
DI water equipment
DC power supply and the power supply unit
Anode box (tube) and circulation device
Ultrafiltration device
Cleaning devices
Heat exchanging equipment
Curing device
If you want to learn more about HLS coating products, please contact Sales Department of Shanghai HLS now
Fax: 86-021-69122952
