Product Details:
|
Application Field: | Elevator Parts | Performance: | Not Fade |
---|---|---|---|
Cooperation Case: | HITACHI,CANNY ELEVATOR | Main Ingredients: | Antirust Pigment,kaolin |
Highlight: | black e coat,black epoxy coating |
Black electrophoretic paint for elevator and the parts
Product Introduction :
HLS-1701ALB/HLS-1701A Black Cationic Epoxy Electrocoat for auto is a new generation electrophoretic coating researched and developed by HLS Paint (Shanghai) Co., Ltd.
|
It represents modern technology of cathodic electrophoretic coating that is environment-friendly with high property and low cost. Such coating does not contain heavy metal like lead, tin, cadmium and mercury etc. It is a two-component, water-dispersed resin,meanwhile, it took in features of previous products, and can adapt galvanized steel sheet perfectly, almost can be applied to foundation coating of all metal, such as: cold and hot rolled steel sheet, galvanized steel sheet, aluminum products and stainless steel sheet etc.
|
This product features shown below:
1,Good stability of bath can adaptable for a longer updating cycle.
2,Have excellent corrosion resistance and weathering resistance, especially suitable for the bottom surface of a painting;
3,The appearance of the coating is flat, delicate, smooth, uniform high gloss.
Main ingredients:
Additives: surface active agent, prevent shrinkage cavity agent ,
Resin: polyurethane modified epoxy resin ,
Curing agent: totally enclosed multi-isocyanates .
Product quality data:
Project | Technical data | Test standard | ||
Resin (HLS-1701ALB) |
Black Paste (HLS-1701A) | |||
pH | 25℃ | 6.0±1.0 | —— | GB/T 9724 |
Conductivity | 25℃, μs/cm | 1400±600 | —— | HG/T 3334 |
Appearance | —— | Milky white liquid | Black viscous liquid,no agglomeration | Visual |
Storage stability | No stratified state, and there were no obvious difference compared to before storage |
In 5-35 ℃ temperature 1 year |
Filling tank proportion and method:
⑴ Bath preparation
Ratio:
Resin 1200.00
Paste 200.00
DI water 2000.00
Total 3400.00
⑵ Ripening conditions
Sample quantity: 3000~5000g
Container: 5L (Diameter 16cm)
Tank temperature:28-30 ℃
Time: 24~48Hr
Mixed conditions: impeller diameter 8cm (speed 200rpm)
(3) Coating conditions
Experimental panel: phosphated cold-rolled steel plate
Tank temperature: 30-36℃
Pole ratio: A/C = 1/2 ~ 1/4
Distance of electrodes: 15cm
ED time: For full immersing 1-3 minutes ( 20 seconds soft start)
Baking conditions:(165-185)℃×(20-30)min (Keeping temperature of parts coated)
Customers in the elevator industry:
![]() |
![]() |
Fax: 86-021-69122952