Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
HLS Coatings (Shanghai)Co.Ltd
Home ProductsElectrophoretic Paint For Casting

Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint

China HLS Coatings (Shanghai)Co.Ltd certification
China HLS Coatings (Shanghai)Co.Ltd certification
I'm Online Chat Now

Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint

Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint
Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint

Large Image :  Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint

Product Details:
Place of Origin: Shanghai China (Mainland)
Brand Name: HAOLISEN
Payment & Shipping Terms:
Packaging Details: 50kg、60 kg、200kg、1000kg packaging barrels
Delivery Time: 30-60 Days
Detailed Product Description
High Light:

Pump Waterborne Polyurethane Paint

,

Zinc Rich Primer Polyurethane Paint

,

Epoxy Primer Waterborne Polyurethane Paint

 

Water borne paint for Pump

 

 

Cooperation Client Directory:Siemens;Wilo;Leybold; SNC

 

Advantages: High performance; Low VOCs

 

 

Product Specification

 

  1. Type: Epoxy zinc-rich primer ET-0003A

 

一,Product Introduction

Epoxy zinc-rich primer ET-0003A is a new generation waterborne acrylic finish paint researched and developed by HLS Paint (Shanghai) Co., Ltd.Low solvent content, no heavy metals such as lead, cadmium, chromium, mercury, etc. The paint film has good adhesion and good flexibility; this series of products has excellent corrosion resistance; it is suitable for different metal plates..

 

 

二,Scope of application

The product can be directly attached to the metal substrate; the upper coating is generally a matching water-based topcoat.

 

三,Product quality data

 

Original paint technical date

Number Project Technical data Test standard
1 original No agglomerate and impurities Visual after stirring
2 Viscosity T-4,25℃,S ≥90 GB/T1723
3 Fineness μm ≤30 GB/T1724
4 Hiding power g/m2 ≤140 GBT 23986-2009
 

Notes: 1. GB is the national standard.

2. Above technical indicators and usage requirements indicators may be in the project, testing methods and performance index is different, the agreed amount shall prevail.

 

四,Construction technological parameter

1. Suitable substrate:Metal substrate such as cast iron and tinplate .

2. Mixture ratio

  Binder Hardener
Ratio (mass ratio) 7 1

3. Suitable for construction environment temperature and humidity: Temperature 10-35℃, humidity:30-80%RH

4. Substrate processing: There is no oil pollution and dust particles of substrate

5. Applicable construction way: Air spraying, Airless spraying, Electrostatic spray.

6. Flow time:2-5min/10-35℃.

7. Curing conditions:70-80 ℃/ 30-40 min (workholding time).

8. Personnel protection: workers should wear personal protective equipment.

 

 

 

五,Precautions

1. Equipment cleaning can use diluted ammonia solution or matched cleaning agent.

2. It is harmful to health after inhaled. Please take when the construction security measures.

 

六,Storage, packaging and transportation

This product is a water-borne coatings, non-hazardous, non-inflammable and explosive products; transportation to prevent direct sunlight, avoid freezing (>5℃ ); Packaging for the 20L / 50L / 100L / 200L plastic drum; in the transport and storage of drums should be maintained clean, avoid charging the dirt brought in on drums during filling tank, again checked and confirmed that the quality of products. This product should be indoor storage, good ventilation, dry, protect against freezing and overheating, the storage temperature should be controlled at 5~35℃, products from the date of production, over shelf, experimentation is required to determine whether can continue to use.

 

  1. Type: Epoxy intermediate coating ET-1001A

 

 

一,Product Introduction

Epoxy intermediate coating ET-1001A is a new generation waterborne acrylic finish paint researched and developed by HLS Paint (Shanghai) Co., Ltd.Low solvent content, no heavy metals such as lead, cadmium, chromium, mercury, etc. The paint film has good adhesion and good flexibility; this series of products has excellent corrosion resistance; it is suitable for different metal plates..

 

 

二,Scope of application

The product can be directly attached to the metal substrate; the upper coating is generally a matching water-based topcoat.

 

三,Product quality data

 

Original paint technical date

Number Project Technical data Test standard
1 original No agglomerate and impurities Visual after stirring
2 Viscosity T-4,25℃,S ≥90 GB/T1723
3 Fineness μm ≤30 GB/T1724
4 Hiding power g/m2 ≤140 GBT 23986-2009
 

Notes: 1. GB is the national standard.

2. Above technical indicators and usage requirements indicators may be in the project, testing methods and performance index is different, the agreed amount shall prevail.

 

四,Construction technological parameter

1. Suitable substrate:Metal substrate such as cast iron and tinplate .

2. Mixture ratio

  Binder Hardener
Ratio (mass ratio) 7 1

3. Suitable for construction environment temperature and humidity: Temperature 10-35℃, humidity:30-80%RH

4. Substrate processing: There is no oil pollution and dust particles of substrate

5. Applicable construction way: Air spraying, Airless spraying, Electrostatic spray.

6. Flow time:2-5min/10-35℃.

7. Curing conditions:70-80 ℃/ 30-40 min (workholding time).

8. Personnel protection: workers should wear personal protective equipment.

 

 

 

五,Precautions

1. Equipment cleaning can use diluted ammonia solution or matched cleaning agent.

2. It is harmful to health after inhaled. Please take when the construction security measures.

 

六,Storage, packaging and transportation

This product is a water-borne coatings, non-hazardous, non-inflammable and explosive products; transportation to prevent direct sunlight, avoid freezing (>5℃ ); Packaging for the 20L / 50L / 100L / 200L plastic drum; in the transport and storage of drums should be maintained clean, avoid charging the dirt brought in on drums during filling tank, again checked and confirmed that the quality of products. This product should be indoor storage, good ventilation, dry, protect against freezing and overheating, the storage temperature should be controlled at 5~35℃, products from the date of production, over shelf, experimentation is required to determine whether can continue to use.

 

  1. Type: Polyurethane topcoat PT-2028

 

一,Product introduction

PT-2028 series two-component water-based polyurethane topcoat is a new generation of two-component water-based environmental protection topcoat developed by Haorisen Coatings (Shanghai) Co., Ltd .; it has low solvent content and does not contain lead, cadmium, chromium, mercury and other heavy metals. The paint film has the characteristics of good adhesion, good flexibility, etc. This series of products can be adjusted with various effects and colors to meet the design requirements of different products; it has excellent decoration and protection.

 

二,Scope of application

The product is mainly used for water-based epoxy primer / intermediate primer.

 

三,Technical index

3.1 Technical index of original paint

Serial number Project Index Inspection standards
1 original No agglomerate and impurities Visual after stirring
2 Viscosity 涂-4,25℃,s ≥30 GB/T1723
3 Fineness μm ≤10 GB/T1724
4 VOC content g/L ≤150 GBT 23986
5 Non-volatile matter content % ≥45 GB/T 1725
6 Proportion of original paint kg/L ≥1.1 GB/T 6750
7 Hiding power g/m2 ≤100 GB/T 1726
 

Notes: 1. GB is the national standard.

2. Above technical indicators and usage requirements indicators may be in the project, testing methods and performance index is different, the agreed amount shall prevail.

 

四,Construction process parameters

1. Suitable substrate:Metal substrate such as cast iron and tinplate .

2. Mixture ratio

  Binder Hardener Water
Ratio (mass ratio) 4.0-6.0 1 Right amount
 

3. Suitable for construction environment temperature and humidity: Temperature 10-35℃, humidity:30-80%RH

4. Substrate processing: There is no oil pollution and dust particles of substrate

5. Applicable construction way: Air spraying, Airless spraying, Electrostatic spray.

6,Flow time:8-15min/10-35℃.

7,Curing conditions:70-80℃/20-40min(workholding time).

8. Personnel protection: workers should wear personal protective equipment.

 

五,Precautions

1. Equipment cleaning can use diluted ammonia solution or matched cleaning agent.

2. It is harmful to health after inhaled. Please take when the construction security measures.

 

 

六,Storage, packaging and transportation

This product is a water-borne coatings, non-hazardous, non-inflammable and explosive products; transportation to prevent direct sunlight, avoid freezing (>5℃ ); Packaging for the 20L / 50L / 100L / 200L plastic drum; in the transport and storage of drums should be maintained clean, avoid charging the dirt brought in on drums during filling tank, again checked and confirmed that the quality of products. This product should be indoor storage, good ventilation, dry, protect against freezing and overheating, the storage temperature should be controlled at 5~35℃, products from the date of production, over shelf, experimentation is required to determine whether can continue to use.

 

Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint 0 Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint 1
Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint 2 Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint 3
Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint 4 Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint 5
Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint 6 Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint 7
Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint 8 Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint 9
Epoxy Zinc Rich Primer Pump Waterborne Polyurethane Paint 10

 

 

 

Contact Details
HLS Coatings (Shanghai)Co.Ltd

Contact Person: Penny

Tel: +8618049835525

Send your inquiry directly to us (0 / 3000)