Payment & Shipping Terms:
|Application Field:||Bicycle||Performance:||Excellent Adhesion|
|Cooperation Case:||Hellobike, Little Star||Main Ingredients:||Surface Active Agent|
electrophoretic lacquer coating
Special Bicycle white electrophoresis paint
Product Introduction :
HL-1507LB/HS-5500 White epoxy acrylic cathodic electrophoretic coating for auto is the 8th generation electrophoretic coating researched and developed by HLS Paint (Shanghai) Co., Ltd. and get the national invention patent and the Shanghai science and technology commission of high-tech transformation project
It represents modern technology of cathodic electrophoretic coating that is environment-friendly with high property and low cost. Such coating does not contain heavy metal like lead, tin, cadmium and mercury etc. It is a two-component, water-dispersed resin. The coating that does not contain tin element meet the latest environ-mental regulations of European Union, North America, Japan and other requirements in advance, which is the inevitable trend of future environ-mental coating and low cost; meanwhile, it took in features of previous products, and can adapt galvanized steel sheet perfectly, almost can be applied to foundation coating of all metal
such as: cold and hot rolled steel sheet, galvanized steel sheet, aluminum products, zinc-aluminum alloy sheet and stainless steel sheet etc.
This product features shown below :
The appearance of the coating is flat, delicate, smooth.
Good stability of bath can adaptable for a longer updating cycle.
Strong anti-corrosion properties, good salt spray resistance workpiece edge.
The main component :
Matrix resin: polyurethane modified epoxy resin
|Neutralizing agent: organic acid|
Additives: surface active agent, prevent shrinkage cavity agent, anti-yellowing agent.
Product quality data :
|Project||Technical data||Test standard|
|White Paste (HS-5500)|
|Conductivity||25℃, μs/cm||1400±400||——||HG/T 3334|
|Appearance||——||Milky white liquid||Black viscous liquid,no agglomeration||Visual|
No stratified state, and there were no obvious difference compared to before storage
|In 5-35 ℃ temperature 1 year|
Note: pH, conductivity measurement in the resin/pure water = 1:1 dilution
Construction equipment :
Cathodic electrophoretic coating construction in the electrophoresis tank, so need to have the following equipment:
Circulation devices (including filter, fill the paint device)
DI water equipment
DC power supply and the power supply unit
Anode box (tube) and circulation device
Heat exchanging equipment
Storage, packaging and transportation :
This product is a water-borne industrial coatings, non-hazardous, non-inflammable and explosive products; transportation to prevent direct sunlight, avoid freezing (>5℃ ); Packaging for 50/60/200L Plastic barrel; in the transport and storage of drums should be maintained clean, avoid charging the dirt brought in on drums during filling tank, again checked and confirmed that the quality of products, including paste resin, emulsions and additives should be indoor storage, good ventilation, dry, protect against freezing and overheating, the storage temperature should be controlled at 5～35℃, products from the date of production, over shelf, experimentation is required to determine whether can continue to use.
Specification statement :
This manual contains information and recommendations are based on our current knowledge and experience, accurate to the date of publication so far. It cannot be used as a guarantee or commitment, in any case, responsibility for users to decide on the use of this product is intended availability. We remain in the process or new development within the scope of the right to change product specifications. Because we cannot control the construction conditions, hope through customers own experiments to determine satisfaction with the final results.
If you want to learn more about HLS coating products, please contact Sales Department of Shanghai HLS now
Customer production site :
Contact Person: Penny