Payment & Shipping Terms:
|Application Field:||Elevator Parts||Performance:||Not Fade|
|Cooperation Case:||MITUSUBISHI,XJ Schindler||Main Ingredients:||Titanium Pigment; Antirust Pigment|
|Solvent:::||Alcohol Ether||Neutralizing Agent ::||Organic Acid|
Solution for elevator and the parts electrodeposition coating
HLS-1701ALB/HLS-1701A Black Cationic Epoxy Electrocoat for auto is a new generation electrophoretic coating researched and developed by HLS Paint (Shanghai) Co., Ltd.
It represents modern technology of cathodic electrophoretic coating that is environment-friendly with high property and low cost. Such coating does not contain heavy metal like lead, tin, cadmium and mercury etc. It is a two-component, water-dispersed resin,meanwhile, it took in features of previous products, and can adapt galvanized steel sheet perfectly, almost can be applied to foundation coating of all metal, such as: cold and hot rolled steel sheet, galvanized steel sheet, aluminum products and stainless steel sheet etc.
This product features shown below:
Strong anti-corrosion properties, good salt spray resistance workpiece edge.
Have excellent corrosion resistance and weathering resistance, especially suitable for the bottom surface of a painting；
Good stability of bath can adaptable for a longer updating cycle.
Neutralizing agent :organic acid
Pigmen:Titanium pigment, carbon black, kaolin, antirust pigment
Filling tank proportion and method
⑴ Ripening conditions
Sample quantity: 3000～5000g
Container: 4L (Diameter 16cm)
Tank temperature: 28-30 ℃
Mixed conditions: impeller diameter 8cm (speed 200rpm)
Storage, packaging and transportation :
This product is a water-borne industrial coatings, non-hazardous, non-inflammable and explosive products; transportation to prevent direct sunlight, avoid freezing (>5℃ ); Packaging for 50/60/200L Plastic barrel; in the transport and storage of drums should be maintained clean, avoid charging the dirt brought in on drums during filling tank, again checked and confirmed that the quality of products, including paste resin, emulsions and additives should be indoor storage, good ventilation, dry, protect against freezing and overheating, the storage temperature should be controlled at 5～35℃, products from the date of production, over shelf, experimentation is required to determine whether can continue to use.
Customers in the elevator industry:
Contact Person: Penny